Specialist LED design and installation for warehouses, cash & carry, and retail. Engineered for the pixel pitch, brightness, and viewing distance your space actually needs.
Whether you need a single-screen menu board or a multi-panel video wall, we specify the right hardware for your viewing distance, ambient brightness, and content type, then install it as part of your wider fit-out.
Multiple LED panels combined into a single seamless display, mounted above tills, behind reception, or on shop-floor focal points. Perfect for cash & carry stores promoting brands and offers, or warehouses showing live operational data.
Single-screen or paired commercial displays for promoting products, sale messaging, brand campaigns, or running rotating ad content. Designed for high-traffic areas where dwell time is short.
Daylight-readable LED screens engineered to handle UK weather. Used on shopfronts, forecourts, vehicle entrances, and exterior signage. IP-rated, surge-protected, weather-sealed.
Free-standing slim LED panels designed to replace traditional A1 or A0 posters. High brightness, schedulable, and rugged enough for retail and wholesale environments.
Practical LED screens for live stock data, queue numbers, opening hours, departure boards, or directional information. Networked and updated from a central control point.
High-resolution LED panels for close-viewing environments such as control rooms, boardrooms, broadcast studios, and corporate reception areas. Edge-to-edge seamless, near-print resolution.
Most buyers we speak to know they want LED. Few know which LED. Here's what we ask before we quote, and what the answers mean for your install.
Pixel pitch is the distance between adjacent LEDs in millimetres. Smaller pitch means higher resolution and more cost per square metre. Simple rule: minimum viewing distance in metres roughly equals the pitch number.
A P2.5 screen looks crisp from 2.5m, perfect for an indoor advertising display people walk past. A P10 reads clearly from 10m, ideal for a video wall mounted high above till lanes. We specify pitch based on where people actually stand.
Brightness is measured in nits. Indoor screens typically run 800-1,500 nits. Outdoor screens in UK daylight need 4,500-6,000 nits. Above-window or shopfront screens facing direct sunlight need 6,000 or more.
Under-spec the nits and your install looks dull or unreadable. Over-spec and you waste money. We pick for the ambient light in your specific location, not a generic average.
IP54 handles indoor dust and the occasional splash. IP65 handles direct rain. IP67 handles submersion. Many "outdoor" screens are only IP54 on the back and need housings to be truly weatherproof.
We specify IP65 or higher for every outdoor install (front, back, and every cable seal) so the screen doesn't fail in its first winter.
An LED screen is only useful if your team can update what's on it. We set up content management systems that let you schedule ads, swap promotions, run different content on different screens, and update remotely from a laptop or phone.
We can also provide ongoing content support if you'd rather not manage it in-house.
Wall-mounted, ceiling-suspended, freestanding totem, integrated into existing racking, or housed in a custom structure. Every LED install is also a structural install. Our team handles the load calculations, the fixing, and any reinforcement needed.
If your space needs new racking, mezzanines, or partitions to accommodate the screen, our infrastructure team builds it. One project, one timeline.
Every LED install also needs structure to mount it, power to run it, and a network to drive it. We handle all three.
Our team handles structural mounting: modifying existing racking, building new wall structures, reinforcing partitions, or designing custom freestanding installations. NICEIC- and CSCS-qualified tradespeople, no subcontractor handovers.
Dedicated circuits, surge protection, emergency cut-offs, fused spurs, installed and certified by our in-house electricians. We commission every LED install with full electrical sign-off, so there are no "who's responsible if it shorts" conversations down the line.
Structured Cat6 cabling, wi-fi coverage, content management server setup, and remote-monitoring integration. Connect your LED to your existing till system, stock feed, or marketing platform so the screens show live data, not static images.
Multi-panel LED display package above the cash desks, paired with new pallet racking around the perimeter and a dedicated electrical supply. Store remained open throughout install.
Four networked LED information displays mounted at aisle ends, showing live stock levels and pick instructions. Integrated with the client's existing inventory system.
Vertical LED totems installed across a high-street fashion retailer, displaying rotating brand and seasonal content. Installed overnight, no trading impact.
We'll come back within 24 hours with either a fixed quote or a site-survey time. No callback chains, no agency middlemen.
Some briefs are easier to talk through than type. Our project managers (not salespeople) pick up directly.
